DIY Finishing Box

Set up a workspace with a flat surface away from animals and family members. You will need a small dish of water to wet the polishing paper with. Don't forget to wear gloves as resin dust is not good for your skin.
Start with the green Zona papers. The papers are numbered on the back in order of use.

Step 1: Wet the Zona paper by dipping the dice into the water. You will want to sand the dull sides of the dice. Use figure 8 and circular motions. Sand each dull side evenly, making sure not to over sand.
Step 2: Once the dice have been sanded through the green paper and have no visible scratches, move to the grey paper. You will repeat the same process of figure 8 and circular motions. Continue through the process until you go through each Zona paper.
Step 3: Clean the polished dice using water and an old toothbrush to get the resin dust out of the numbers.
Step 4: Get your paint and paintbrush. You will be painting in the numbers. If you get any paint on the face, wipe it on a paper towel.
Step 5: Wipe the faces on the white Zona to get the shine back.
Step 6: Admire your work! You did an amazing job!